View SQD40N06-14L-15_8377337.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 1 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 automotive n-channel 60 v (d-s) 175 c mosfet features ? trenchfet ? power mosfet ? package with low thermal resistance ? 100 % r g and uis tested ? aec-q101 qualified d ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 notes a. package limited. b. pulse test; pulse width 300 s, duty cycle 2 %. c. when mounted on 1" square pcb (fr4 material). d. parametric verification ongoing. product summary v ds (v) 60 r ds(on) ( ) at v gs = 10 v 0.014 r ds(on) ( ) at v gs = 4.5 v 0.017 i d (a) 40 configuration single package to-252 to-252 top view to g d s drain connected to tab d g s n-channel mosfet absolute maximum ratings (t c = 25 c, unless otherwise noted) parameter symbol limit unit drain-source voltage v ds 60 v gate-source voltage v gs 20 continuous drain current t c = 25 c a i d 40 a t c = 125 c 29 continuous source curre nt (diode conduction) a i s 40 pulsed drain current b i dm 160 single pulse avalanche current l = 0.1 mh i as 32 single pulse avalanche energy e as 51 mj maximum power dissipation b t c = 25 c p d 75 w t c = 125 c 25 operating junction and storage temperature range t j , t stg -55 to +175 c thermal resistance ratings parameter symbol limit unit junction-to-ambient pcb mount c r thja 60 c/w junction-to-case (drain) r thjc 2
sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 2 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 notes a. pulse test; pulse width 300 s, duty cycle 2 %. b. guaranteed by design, not subj ect to production testing. c. independent of operating temperature. stresses beyond those listed under absolute maximum ratings ma y cause permanent damage to th e device. these are stress rating s only, and functional operation of the device at these or any other conditions beyond those in dicated in the operational sectio ns of the specifications is not implied. exposure to absolute maximum rating conditions for extended pe riods may affect device reliability. specifications (t c = 25 c, unless otherwise noted) parameter symbol test cond itions min. typ. max. unit static drain-source breakdown voltage v ds v gs = 0, i d = 250 a 60 - - v gate-source threshold voltage v gs(th) v ds = v gs , i d = 250 a 1.5 2.0 2.5 gate-source leakage i gss v ds = 0 v, v gs = 20 v - - 100 na zero gate voltage drain current i dss v gs = 0 v v ds = 60 v - - 1 a v gs = 0 v v ds = 60 v, t j = 125 c - - 50 v gs = 0 v v ds = 60 v, t j = 175 c - - 250 on-state drain current a i d(on) v gs = 10 v v ds 5 v 30 - - a drain-source on-s tate resistance a r ds(on) v gs = 10 v i d = 20 a - 0.011 0.014 v gs = 10 v i d = 20 a, t j = 125 c - - 0.024 v gs = 10 v i d = 20 a, t j = 175 c - - 0.029 v gs = 4.5 v i d = 20 a, t j = 25 c - 0.014 0.017 forward transconductance a g fs v ds = 15 v, i d = 20 a - 52 - s dynamic b input capacitance c iss v gs = 0 v v ds = 25 v, f = 1 mhz - 1685 2105 pf output capacitance c oss - 305 385 reverse transfer capacitance c rss - 180 225 total gate charge c q g v gs = 10 v v ds = 30 v, i d = 40 a -3451 nc gate-source charge c q gs -69 gate-drain charge c q gd -8.513 gate resistance r g f = 1 mhz 0.8 1.7 3.7 turn-on delay time c t d(on) v dd = 30 v, r l = 0.75 i d ? 40 a, v gen = 10 v, r g = 1 -812 ns rise time c t r -1320 turn-off delay time c t d(off) -2233 fall time c t f -914 source-drain diode ratings and characteristics b pulsed current a i sm --160a forward voltage v sd i f = 20 a, v gs = 0 - 0.85 1.2 v
sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 3 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) output characteristics transconductance capacitance transfer characteristics on-resistance vs. drain current gate charge 0 20 40 60 80 100 03691215 v gs =10vthru5v v gs =4v v gs =3v v d s - drain-to- s ource voltage (v) i d - drain current (a) 0 16 32 48 64 80 0 8 16 24 32 40 i d - drain current (a) - tran s conductance ( s ) g f s t c = 125 c t c = 25 c t c = - 55 c c r ss 0 500 1000 1500 2000 2500 0 102030405060 c i ss c o ss v d s - drain-to- s ource voltage (v) c - capacitance (pf) 0 20 40 60 80 100 012345 t c = - 55 c t c = 125 c t c = 25 c v gs - g ate-to- s ource voltage (v) i d - drain current (a) 0 0.01 0.02 0.03 0.04 0.05 0 1224364860 v gs =10v v gs =4.5v r d s (on) - on-re s i s tance ( ) i d - drain current (a) 0 2 4 6 8 10 0 5 10 15 20 25 30 35 i d =40a v d s =30v q g - total g ate charge (nc) v gs - g ate-to- s ource voltage (v)
sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 4 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t a = 25 c, unless otherwise noted) on-resistance vs. junction temperature on-resistance vs. gate-to-source voltage source drain diode forward voltage threshold voltage drain source breakdown vs . junction temperature 0.5 -50 -25 0 25 50 75 100 125 150 175 0.8 1.1 1.4 1.7 2.0 2.3 i d =20a v gs =10v t j - junction temperature (c) (normalized) r d s (on) - on-re s i s tance 0 0.02 0.04 0.06 0.08 0.10 0246810 t j = 25 c t j = 150 c r d s (on) - on-re s i s tance ( ) v gs - g ate-to- s ource voltage (v) 0 0.2 0.4 0.6 0.8 1.0 1.2 1 0.01 0.001 0.1 10 100 t j = 25 c t j = 150 c v s d - s ource-to-drain voltage (v) i s - s ource current (a) -1.5 -50 -25 0 25 50 75 100 125 150 175 -1.1 -0.7 -0.3 0.1 0.5 i d =5ma i d = 250 a v gs (th) variance (v) t j - temperature (c) 60 -50 -25 25 50 75 100 125 150 175 0 63 66 69 72 75 v ds - drain-to-source v oltage (v ) t j - junction temperature (c) i d =10ma
sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 5 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thermal ratings (t a = 25 c, unless otherwise noted) safe operating area normalized thermal transient impedance, junction-to-ambient v ds - drain-to-source voltage (v) * v gs minimum v gs at which r ds(on) is specified - drain current (a) i d t c = 25 c single pulse 10 ms 1 ms r ds(on) * limited by 100 ms, 1 s, 10 s, dc 0.01 0.1 1 10 100 0.01 0.1 1 10 100 bvdss limited i dm limited 100 s i d limited sq u are wave p u lse d u ration (s) 2 1 0.1 0.01 10 -4 10 -3 10 -2 10 -1 10 n ormalized eff ective transient thermal impedance 1000 0.2 0.1 0.05 0.02 single p u lse d u ty cycle = 0.5 100 1
sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 6 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 thermal ratings (t a = 25 c, unless otherwise noted) normalized thermal transient impedance, junction-to-case note ? the characteristics shown in the two graphs - normalized transient thermal impedance junction-to-ambient (25 c) - normalized transient thermal impedance junction-to-case (25 c) are given for general guidelines only to enable the user to ge t a ball park indication of part capabilities. the data are ext racted from single pulse transient thermal impedance characteristics which are developed from empirical measurements. the latter is valid for the part mounted on printed circuit board - fr4, size 1" x 1" x 0.062" , double sided with 2 oz. copper, 100 % on both sides. the part ca pabilities can widely vary depending on actual application parameters and operating conditions. vishay siliconix maintains worldw ide manufacturing ca pability. products may be manufactured at one of several qualified locatio ns. reliability da ta for silicon technology and package reliability represent a composite of all qu alified locations. for related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67002 . sq u are wave p u lse d u ration (s) 2 1 0.1 0.01 10 -4 10 -3 10 -2 10 1 10 -1 n ormalized eff ective transient thermal impedance 0.2 0.1 d u ty cycle = 0.5 30 0.05 0.02 single p u lse
sqd40n06-14l www.vishay.com vishay siliconix s15-1873-rev. c, 10-aug-15 7 document number: 67002 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note a. as of april 2014 revision history a revision date description of change c 04-aug-15 ? revised r g minimum limit
ordering information www.vishay.com vishay siliconix revision: 08-oct-15 1 document number: 66957 for technical questions, contact: automostechsuppo rt@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dpak / to-252 and reverse dpak ordering codes for the sq rugged series power mosfet s in the dpak / to-252 and reverse dpak packages: note a. old ordering code is obsolete and no longer valid for new orders datasheet part number o ld ordering code a new ordering code sqd07n25-350h sqd07n25-350h-ge3 sqd07n25-350h_ge3 sqd100n03-3m2l sqd100n03-3m2l-ge3 sqd100n03-3m2l_ge3 sqd100n03-3m4 sqd100n03-3m4-ge3 sqd100n03-3m4_ge3 sqd100n04-3m6 sqd100n04-3m6-ge3 sqd100n04-3m6_ge3 sqd100n04-3m6l sqd100n04-3m6l-ge3 sqd100n04-3m6l_ge3 sqd10n30-330h sqd10n30-330h-ge3 sqd10n30-330h_ge3 sqd15n06-42l sqd15n06-42l-ge3 sqd15n06-42l_ge3 sqd19p06-60l sqd19p06-60l-ge3 sqd19p06-60l_ge3 sqd23n06-31l sqd23n06-31l-ge3 sqd23n06-31l_ge3 sqd25n06-22l sqd25n06-22l-ge3 sqd25n06-22l_ge3 sqd25n15-52 sqd25n15-52-ge3 sqd25n15-52_ge3 sqd30n05-20l sqd30n05-20l-ge3 sqd30n05-20l_ge3 sqd40n06-14l sqd40n06-14l-ge3 sqd40n06-14l_ge3 sqd40n10-25 sqd40n10-25-ge3 sqd40n10-25_ge3 sqd40p10-40l sqd40p10-40l-ge3 sqd40p10-40l_ge3 sqd45p03-12 sqd45p03-12-ge3 sqd45p03-12_ge3 sqd50n04-5m6 sqd50n04-5m6-ge3 sqd50n04-5m6_ge3 sqd50n05-11l sqd50n05-11l-ge3 sqd50n05-11l_ge3 sqd50n06-09l sqd50n06-09l-ge3 sqd50n06-09l_ge3 sqd50n10-8m9l sqd50n10-8m9l-ge3 sqd50n10-8m9l_ge3 sqd50p03-07 sqd50p03-07-ge3 sqd50p03-07_ge3 sqd50p04-13l sqd50p04-13l-ge3 sqd50p04-13l_ge3 sqd50p04-09l sqd50p04-09l-ge3 sqd50p04-09l_ge3 sqd50p06-15l sqd50p06-15l-ge3 sqd50p06-15l_ge3 sqd50p08-25l sqd50p08-25l-ge3 sqd50p08-25l_ge3 sqd50p08-28 sqd50p08-28-ge3 sqd50p08-28_ge3 sqd90p04-9m4l sqd90p04-9m4l-ge3 sqd90p04-9m4l_ge3 sqd97n06-6m3l sqd97n06-6m3l-ge3 sqd97n06-6m3l_ge3 sqr40n10-25 sqr40n10-25-ge3 sqr40n10-25_ge3 sqr50n04-3m8 sqr50n04-3m8-ge3 sqr50n04-3m8_ge3
package information www.vishay.com vishay siliconix revision: 02-sep-13 1 document number: 64424 for technical questions, contact: pmostechsupport @vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 to-252aa case outline note ? dimension l3 is for reference only. l3 d l4 l5 b b2 e1 e1 d1 c a1 gage plane height (0.5 mm) e b3 e c2 a l h millimeters inches dim. min. max. min. max. a 2.18 2.38 0.086 0.094 a1 - 0.127 - 0.005 b 0.64 0.88 0.025 0.035 b2 0.76 1.14 0.030 0.045 b3 4.95 5.46 0.195 0.215 c 0.46 0.61 0.018 0.024 c2 0.46 0.89 0.018 0.035 d 5.97 6.22 0.235 0.245 d1 4.10 - 0.161 - e 6.35 6.73 0.250 0.265 e1 4.32 - 0.170 - h 9.40 10.41 0.370 0.410 e 2.28 bsc 0.090 bsc e1 4.56 bsc 0.180 bsc l 1.40 1.78 0.055 0.070 l3 0.89 1.27 0.035 0.050 l4 - 1.02 - 0.040 l5 1.01 1.52 0.040 0.060 ecn: t13-0592-rev. a, 02-sep-13 ? dwg: 6019
application note 826 vishay siliconix document number: 72594 www.vishay.com revision: 21-jan-08 3 application note recommended minimum pads for dpak (to-252) 0.420 (10.668) recommended mi nimum pads dimensions in inches/(mm) 0.224 (5.690) 0.180 (4.572) 0.055 (1.397) 0.243 (6.180) 0.087 (2.202) 0.090 (2.286) return to index return to index
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.

▲Up To Search▲

Price & Availability of SQD40N06-14L-15

	To Download SQD40N06-14L-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .